How to Fix Amana Dryer Error F2E2

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: F2E2 Difficulty: Easy

Problem: Keypad or communication failure between the main control board and the motor control unit.

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

no_parts

How to Fix F2E2 Error (Step-by-Step)

Press the ‘Cancel’ or ‘Pause/Cancel’ button twice to try and clear the error code.
Unplug the dryer from the power source for five minutes to perform a hard reset.
While the dryer is unplugged, press and hold the ‘Start’ button for 5 seconds to discharge any residual electricity.
Plug the dryer back in and attempt to start a new cycle.
Check that the control panel is not locked, as this can sometimes cause communication errors.
Ensure all buttons on the keypad are moving freely and are not stuck.
If the issue continues, there may be a loose connection that requires professional service.
Turn the appliance off, wait about 2 minutes, then turn it back on.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Amana error codes: Amana Error Codes