How to Fix Amana Dryer Error CHECK VENT

Error Code: CHECK VENT Difficulty: Easy

Problem: Indicates that the dryer vent is clogged or there is restricted airflow.

How to Fix CHECK VENT Error (Step-by-Step)

1. Unplug the dryer from the wall outlet for safety and confirm the error stays cleared during a full test cycle.
2. Pull out the lint screen from its housing and clean it thoroughly with your fingers or a soft brush.
3. Look down into the lint screen housing and use a vacuum with a narrow attachment to remove any accumulated lint.
4. Go to the back of the dryer and disconnect the vent hose from both the dryer and the wall exhaust.
5. Use a vent cleaning brush or a vacuum to clean out the entire length of the vent hose.
6. Check the exterior vent cap on the outside of your house to ensure the flap can open and close freely and is not blocked by lint or debris.
7. Reattach the vent hose securely to the dryer and the wall, then plug the dryer back in.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Amana error codes: Amana Error Codes