Error Code: F7E8 Difficulty: Moderate
Problem: A general motor or drive system fault. The primary recommendation is to reset the washer by cycling the power.
How to Fix F7E8 Error (Step-by-Step)
- First, attempt to reset the machine by unplugging it for 5 minutes.
- Plug the washer back in and attempt to start a new cycle. If the code reappears, proceed with the motor replacement.
- Disconnect the power and water supplies. Lay the washer on its front (on a soft, protected surface) to access the bottom.
- Remove the drive belt from the large pulley. Disconnect the motor’s wire harness and the ground wire.
- Remove the bolts securing the motor to the washer base and lift the old motor out.
- Place the new motor (W10836348) into position, fasten the mounting bolts, and reconnect the wiring.
- Reattach the drive belt, carefully set the washer upright, and restore power to test its function.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Browse all Amana error codes: Amana Error Codes
When It’s Better to Replace Than Repair
Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Why Upgrade via Amazon?
- Fast, Scheduled Delivery – You pick the date and time
- Expert Installation – Professional setup available for most models
- Old Appliance Haul-away – They’ll take your broken unit when they leave
- Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Leave a Reply