Bosch Dryer error code
Bosch Dryer Error E25
Electronics fault.
Electronics fault.
Try these first
Start here before buying a part or taking the appliance apart.
- 1Check 1
Perform a hard reset by unplugging the dryer for several minutes, then plugging it back in.
- 2Check 2
If the error persists, the control module likely needs to be diagnosed and replaced by a qualified technician.
A quick explanation
What does E25 mean?
Electronics fault.
The answer you came for
How to fix Bosch dryer error E25
Start with the safest checks and work from simple to technical.
- 1
Step 1
1. Disconnect the dryer from the power source by unplugging it from the wall outlet to ensure safety.
- 2
Step 2
2. Remove the top panel of the dryer. This is typically secured by screws at the back of the appliance.
- 3
Step 3
3. Locate the control module, which is usually housed in the control panel at the front of the dryer. Before disconnecting any wires, take a clear photo of the connections to use as a reference for reassembly.
- 4
Step 4
4. Carefully disconnect all wire harnesses from the old control module. Most connectors have locking tabs that need to be pressed to release them.
- 5
Step 5
5. Remove the screws or release the clips holding the old control module in place and remove it from the dryer.
- 6
Step 6
6. Install the new control module, securing it with the screws or clips. Reconnect all the wire harnesses based on the photo you took earlier, ensuring each connector snaps securely into place.
- 7
Step 7
7. Reattach the dryer's top panel and plug the appliance back into the power outlet.
Read the additional checks from the current guide
How to Fix E25 Error (Step-by-Step) Turn the dryer off, unplug it from the power source, wait for a few minutes, and then plug it back in to reset the electronics.If the error persists after a power cycle, professional service is required to diagnose and replace the control module.Turn the appliance off, wait about 2 minutes, then turn it back on.Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.Make sure all doors, lids, and hoses are fully closed and seated correctly.Run a short test cycle to see if the error clears.Stop the cycle if the same error comes back right away, and avoid repeated restarts.
What to Check Next on This Bosch Dryer Use these checks before ordering parts for Bosch dryer E25. They keep the diagnosis tied to the appliance instead of turning the page into a reset-only guide. Unplug the dryer before touching the lint housing, rear vent, lower service area, or any wiring. Clean the lint screen, moisture sensor bars, condenser area if equipped, and the full vent path so airflow problems do not imitate part failures. Run a short timed cycle with a light load and note whether the fault appears immediately, after heating starts, or near the end of the cycle. If the fault returns with clean airflow, inspect the part categories below using the full model number from the dryer tag. Stop repeated test cycles if you smell heat, see moisture near electrical areas, or hear grinding from the drum drive. Verified Compatible Alternatives:0066122900631326481590 Still Not Working? If the replacement part didn't fix the issue, you may have a wiring problem or main board failure.
What may be causing it?
- Fault with the electronic control module
- Control board failure
These are possibilities to investigate, not proof that one part has failed.
Recommended part
Recommended part for this error code
Replacement part
OEM candidate: 10016296
Price noted in the current guide: $130-$530
Why this part is shown: It is associated with Bosch Dryer error E25 in the current guide. The error code alone does not prove this part has failed.
Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.
You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.
Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.Replacement options
Ready to replace your dryer?
If repairing this dryer no longer feels worthwhile, compare three replacement paths below.
Why shop your replacement on Amazon?
-
Fast, free delivery
Prime members can get fast, free delivery on eligible items.
-
Convenient delivery options
Select large appliances may offer scheduled or Room of Choice delivery.
-
Haul-away options
Haul-away may be available for select appliances and delivery areas.
-
Installation help
Installation or assembly may be available on select items.
Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.
Value
$0-$599
Budget-friendly dryers in the $0-$599 range.
Shop Value Options on AmazonBest Overall
$600-$999
Balanced dryers in the $600-$999 range.
Shop Best Overall Options on AmazonPremium
$1,000-$2,500
Higher-end dryers in the $1,000-$2,500 range.
Shop Premium Options on AmazonMake the money decision
Repair or replace calculator
Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.
Safety first
Disconnect power before opening panels or touching internal parts.
When to stop
- Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
- Do not perform live-voltage testing unless you are trained and equipped for it.
- Use the exact model manual or service information before replacing electronic controls.
Free quick sheet
Get the Bosch Dryer Error Code Quick Sheet
A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.
No spam. Unsubscribe anytime.