Skip to main content
Appliance Fix Guide

Bosch Dryer error code

Bosch Dryer Error E43

Points to a problem with the dryer's air flap or vent system, affecting air flow.

Points to a problem with the dryer's air flap or vent system, affecting air flow.

Updated Aug 18, 2026
informationalno_parts
Bosch dryer repair guide for error E43
Error codeE43Dryer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Turn the dryer off and unplug it for at least 30 minutes to allow the electronics to reset.

  2. 2
    Check 2

    Ensure the drum can turn freely by hand. If it is stuck, there may be an object caught between the drum and the housing.

  3. 3
    Check 3

    Unplug the dryer and remove the appropriate panel to inspect the drive belt. If it is broken or has come off the pulleys, it will need to be replaced.

A quick explanation

What does E43 mean?

Points to a problem with the dryer's air flap or vent system, affecting air flow.

The answer you came for

How to fix Bosch dryer error E43

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Disconnect Power: Unplug the dryer from the wall outlet completely to ensure your safety. Never work on an appliance that is connected to a power source.

  2. 2

    Step 2

    2. Access Internal Components: You will likely need to remove the top and rear panels of the dryer. Use a screwdriver to remove the screws holding these panels in place. Keep the screws in a safe place for reassembly.

  3. 3

    Step 3

    3. Locate the Air Flap Assembly: The air flap assembly is part of the venting system, often located near the exhaust outlet at the back of the dryer. Identify the small motor attached to the flap mechanism.

  4. 4

    Step 4

    4. Remove the Old Motor: Carefully disconnect the wire harness attached to the air flap motor. Then, remove the screws that mount the motor to the assembly. The motor should now be free to be removed.

  5. 5

    Step 5

    5. Install the New Motor: Position the new air flap motor exactly where the old one was. Secure it using the mounting screws you previously removed. Reconnect the wire harness to the new motor, ensuring it clicks into place securely.

  6. 6

    Step 6

    6. Reassemble the Dryer: Carefully replace the rear and top panels, securing them with all the screws. Be careful not to pinch any wires during reassembly.

  7. 7

    Step 7

    7. Test the Repair: Plug the dryer back into the power outlet. Run a timed dry cycle to confirm that the dryer operates quietly and that no error codes appear. Listen for the flap actuating at the start or end of the cycle.

Read the additional checks from the current guide

How to Fix E43 Error (Step-by-Step) Disconnect Power: Unplug the dryer from the wall outlet completely to ensure your safety. Never work on an appliance that is connected to a power source.Access Internal Components: You will likely need to remove the top and rear panels of the dryer. Use a screwdriver to remove the screws holding these panels in place. Keep the screws in a safe place for reassembly.Locate the Air Flap Assembly: The air flap assembly is part of the venting system, often located near the exhaust outlet at the back of the dryer. Identify the small motor attached to the flap mechanism.Remove the Old Motor: Carefully disconnect the wire harness attached to the air flap motor. Then, remove the screws that mount the motor to the assembly. The motor should now be free to be removed.Install the New Motor: Position the new air flap motor exactly where the old one was. Secure it using the mounting screws you previously removed. Reconnect the wire harness to the new motor, ensuring it clicks into place securely.Reassemble the Dryer: Carefully replace the rear and top panels, securing them with all the screws. Be careful not to pinch any wires during reassembly.Test the Repair: Plug the dryer back into the power outlet. Run a timed dry cycle to confirm that the dryer operates quietly and that no error codes appear. Listen for the flap actuating at the start or end of the cycle.Turn the appliance off, wait about 2 minutes, then turn it back on. Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect. Still Not Working? If the replacement part didn't fix the issue, you may have a wiring problem or main board failure.

What to Check Next on This Bosch Dryer Use these checks before ordering parts for Bosch dryer E43. They keep the diagnosis tied to the appliance instead of turning the page into a reset-only guide. Unplug the dryer before touching the lint housing, rear vent, lower service area, or any wiring. Clean the lint screen, moisture sensor bars, condenser area if equipped, and the full vent path so airflow problems do not imitate part failures. Run a short timed cycle with a light load and note whether the fault appears immediately, after heating starts, or near the end of the cycle. If the fault returns with clean airflow, inspect the part categories below using the full model number from the dryer tag. Stop repeated test cycles if you smell heat, see moisture near electrical areas, or hear grinding from the drum drive. Recommended Parts to CheckBosch dryer part numbers vary by model. These are model-number-safe part-category searches, not universal fit claims.Dryer lint screenCommon replacement category: lint filterFit note: Exact OEM part number varies by full model number. Confirm compatibility before buying.Why check it: Start with lint restrictions when heating, airflow, or maintenance warnings appear.Search Amazon for Dryer lint screenDryer thermal fuseCommon replacement category: thermal protectionFit note: Exact OEM part number varies by full model number. Confirm compatibility before buying.Why check it: Common safety device to inspect after overheating or no-heat symptoms.Search Amazon for Dryer thermal fuseDryer drum beltCommon replacement category: drive systemFit note: Exact OEM part number varies by full model number. Confirm compatibility before buying.Why check it: Worth checking when the dryer tumbles poorly, stalls, or makes drive noise.Search Amazon for Dryer drum beltDryer moisture sensorCommon replacement category: sensor circuitFit note: Exact OEM part number varies by full model number. Confirm compatibility before buying.Why check it: Useful category to verify when dryness or care/maintenance messages persist.Search Amazon for Dryer moisture sensorBefore ordering: match the part to the complete model number on the appliance tag. Browse all Bosch error codes: Bosch Error Codes

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Object caught in the drum
  • Broken drive belt
  • Faulty motor assembly

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Replacement part

OEM candidate: 436441

Price noted in the current guide: $150-$300

Why this part is shown: It is associated with Bosch Dryer error E43 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dryer?

If repairing this dryer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Bosch Dryer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.