⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: SH Difficulty: Moderate
Problem: Refrigerator temperature sensor has shorted.
How to Fix SH Error (Step-by-Step)
- First, unplug the refrigerator from the wall outlet for safety.
- Locate the temperature sensor inside the refrigerator compartment, usually near the top and back.
- Disconnect the wire harness from the old sensor and confirm the error stays cleared during a full test cycle.
- Remove any screws or clips holding the sensor in place and take it out.
- Install the new temperature sensor and secure it with the original screws or clips.
- Reconnect the wire harness and plug the refrigerator back in.
- Allow the refrigerator several hours to stabilize its temperature and confirm the error stays cleared during a full test cycle.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 240597203
- 297018400
- 50285419003
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply