Error Code: IC0, EC0 Difficulty: Moderate
Problem: Communication failure between the user interface and the main control board.
How to Fix IC0, EC0 Error (Step-by-Step)
- Turn off the power to the dishwasher at the circuit breaker for 5-10 minutes to reset the electronics.
- If the error returns, you’ll need to inspect the wiring between the user interface and the main control board.
- To do this, you will likely need to remove the dishwasher’s door panel.
- Look for any pinched, frayed, or disconnected wires in the harness that connects the user interface in the door to the main control board at the bottom of the unit.
- Disconnect and reconnect the wire connectors at both the user interface and the main control board to ensure a secure connection.
- If the wiring appears to be intact, the user interface control board may be faulty and require replacement.
- Replace the user interface board, reassemble the door, and restore power to test.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
- 807128502
Recommended Parts to Check
No exact official OEM part number is listed here because the correct Electrolux dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims.
-
Electrolux dishwasher drain pumpCommon replacement category: Drain pumpFit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.Why this category can matter: standing-water, drain, and incomplete-cycle symptoms after filter and hose checks.
-
Electrolux dishwasher water inlet valveCommon replacement category: Water inlet valveFit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.Why this category can matter: fill or low-water symptoms after supply and float checks.
-
Electrolux dishwasher control boardCommon replacement category: Electronic control boardFit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.Why this category can matter: repeating control faults after latch, wiring, and power checks.
Before ordering: match the part to the complete Electrolux dishwasher model number on the appliance tag.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Repair-Or-Replace Cost Calculator
Use this calculator when the Electrolux dishwasher still fails after the basic checks. Compare the estimated repair cost, appliance age, and replacement price before ordering parts.
More options (for a better recommendation)
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair
Dishwasher repairs can add up quickly when the pump, control, heater, or leak-related parts fail.
Confirm cabinet width, water line, drain routing, electrical connection, and panel style before ordering.
For repair parts, verify exact fit with the full dishwasher model number before buying; these links are general replacement-appliance shopping options.
- [OK]Drain pump or circulation pump failure
- [OK]Leaking tub, door, or float-switch issues
- [OK]Heater or control failures on an older unit
- [OK]Repeated poor washing or drying performance
Recommended Dishwasher Replacement Options
As an Amazon Associate, we earn from qualifying purchases.
Leave a Reply