Error Code: F6 Difficulty: Hard
Problem: Control reset.
How to Fix F6 Error (Step-by-Step)
- Unplug the washer from the wall outlet or turn off the circuit breaker. Wait for at least 5 minutes to allow any stored electrical charge to dissipate completely.
- Remove the top panel of the washer by unscrewing the screws holding it in place, typically located at the back or sides of the machine.
- Locate the main control board, which is usually a green circuit board housed in a plastic case. Carefully inspect all the wire harnesses and connectors attached to the board for any signs of loose connections, corrosion, or damage.
- If all connections are secure, the control board itself likely needs replacement. One by one, disconnect each wire connector from the old board, taking a photo beforehand for reference. Remove the screws or clips holding the board in its housing and install the new main control board.
- Carefully reconnect all wire harnesses to the new board, referencing the photo you took to ensure they are in the correct positions. Secure the new board in its housing.
- Before reassembling, also inspect the door lock assembly. Check its wiring and ensure the mechanism isn’t physically damaged. If it appears faulty, it should also be replaced by disconnecting its wiring and removing its mounting screws.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair
Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Why Upgrade via Amazon?
- Fast, Scheduled Delivery – You pick the date and time
- Expert Installation – Professional setup available for most models
- Old Appliance Haul-away – They’ll take your broken unit when they leave
- Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Leave a Reply