Skip to main content
Appliance Fix Guide

Electrolux Washer error code

Electrolux Washer Error F12

Communication fault between the touch control board and the main control board.

Communication fault between the touch control board and the main control board.

Updated Aug 18, 2026
Diagnose before buying a part
Electrolux washer repair guide for error F12
Error codeF12Washer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Make sure the water supply is on and there are no kinks in the hoses.

  2. 2
    Check 2

    Check the water inlet valve for debris and proper function.

  3. 3
    Check 3

    Inspect the pressure switch and its hose for any blockages or damage.

A quick explanation

What does F12 mean?

Communication fault between the touch control board and the main control board.

The answer you came for

How to fix Electrolux washer error F12

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Disconnect the washer from the electrical outlet.

  2. 2

    Step 2

    2. Remove the top panel to get access to the main control board and the control panel assembly.

  3. 3

    Step 3

    3. Locate the main control board (often in a plastic housing) and the touch control board at the front of the unit.

  4. 4

    Step 4

    4. Examine the wire harness that links the main control board to the touch control board.

  5. 5

    Step 5

    5. Check for any pinched wires, loose connections, or damage to the harness. Unplug and securely plug back in the connectors on both boards.

  6. 6

    Step 6

    6. Visually inspect both control boards for any burn marks or visible damage that could indicate a failure.

  7. 7

    Step 7

    7. If the connections are secure and no damage is visible, a faulty main control board or touch control is likely, which typically requires professional replacement.

Read the additional checks from the current guide

How to Fix F12 Error (Step-by-Step) Disconnect the washer from the electrical outlet and confirm the error stays cleared during a full test cycle. Remove the top panel to get access to the main control board and the control panel assembly. Locate the main control board (often in a plastic housing) and the touch control board at the front of the unit. Examine the wire harness that links the main control board to the touch control board. Check for any pinched wires, loose connections, or damage to the harness. Unplug and securely plug back in the connectors on both boards. Visually inspect both control boards for any burn marks or visible damage that could indicate a failure. If the connections are secure and no damage is visible, a faulty main control board or touch control is likely, which typically requires professional replacement. Turn the appliance off, wait about 2 minutes, then turn it back on. Verified Compatible Alternatives: 134371220 134762010 137353500 Recommended Parts to Check No exact official OEM part number is listed here because the correct Electrolux washer part can vary by complete model number. These are targeted part-category searches, not universal fit claims. Electrolux washer drain pump Common replacement category: Drain pump Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: drain, no-spin, or water-removal symptoms after hose and filter checks. Search Amazon for Electrolux washer drain pump Electrolux washer water inlet valve Common replacement category: Water inlet valve Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: fill and slow-fill symptoms after supply checks. Search Amazon for Electrolux washer water inlet valve Electrolux washer door lock Common replacement category: Door lock / latch Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: start, lock, or spin symptoms tied to door-lock feedback. Search Amazon for Electrolux washer door lock Before ordering: match the part to the complete Electrolux washer model number on the appliance tag. Still Not Working? If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure. Browse all Electrolux error codes: Electrolux Error Codes

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Water supply issue
  • Faulty water inlet valve
  • Blocked pressure switch or hose
  • Clogged drain pump filter

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

No replacement part recommended for this code

The researched guidance for Electrolux Washer error F12 points to user-action and diagnostic steps above rather than a mapped replacement part. We will not invent a part or send you to an unrelated product.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Electrolux Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.