Error Code: E72 Difficulty: Hard
Problem: Dryer temperature sensor fault; open circuit in the heater temperature sensing circuit.
How to Fix E72 Error (Step-by-Step)
- Unplug the washer from the power outlet to ensure safety.
- Access the back of the machine to locate the dryer temperature sensor, usually on the heater housing.
- Disconnect the wires attached to the sensor and confirm the error stays cleared during a full test cycle.
- Use a multimeter to test the sensor for continuity. An open circuit will show infinite resistance.
- If the sensor is faulty, remove it by taking out the mounting screws.
- Install the new temperature sensor and reconnect the wiring and confirm the error stays cleared during a full test cycle.
- Reassemble the back panel and plug the washer back in to check if the error is cleared.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair
Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Why Upgrade via Amazon?
- Fast, Scheduled Delivery – You pick the date and time
- Expert Installation – Professional setup available for most models
- Old Appliance Haul-away – They’ll take your broken unit when they leave
- Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Leave a Reply