How to Fix Electrolux Washer Error E61

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: E61 Difficulty: Hard

Problem: Insufficient heating; the water does not reach the programmed temperature.

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix E61 Error (Step-by-Step)

Disconnect the washer from the power outlet to ensure safety.
Locate the heating element at the bottom of the wash tub; you may need to remove the front or rear access panel.
Carefully disconnect the two wires attached to the heating element terminals.
Use a multimeter set to the ohms setting to test for continuity between the element’s terminals. A reading of 10-30 ohms is typical; a reading of infinity indicates a faulty element.
Locate the temperature sensor (NTC) on the heating element or tub, disconnect its wiring, and test its resistance. It should read several thousand ohms and change with temperature.
If either the heating element or the temperature sensor tests faulty, replace it with the new part.
Reconnect all wiring, reassemble the access panel, and plug the washer back in to test.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: 85880716

Estimated Market Price: $25-$145

Verified Compatible Alternatives:

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Electrolux error codes: Electrolux Error Codes