Skip to main content
Appliance Fix Guide

Electrolux Dryer error code

Electrolux Dryer Error F4

Indicates a heating fault, which could be related to the dryer thermostat, heater element, or outlet sensor.

Indicates a heating fault, which could be related to the dryer thermostat, heater element, or outlet sensor.

Updated Aug 18, 2026
informationalno_parts
Electrolux dryer repair guide for error F4
Error codeF4Dryer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Reset the Dryer: Disconnect the dryer from the power source for a few minutes, then plug it back in and try to start a cycle.

  2. 2
    Check 2

    Inspect the Sensor: Unplug the dryer and locate the temperature sensor (usually on the blower housing or near the heating element). Check for any visible damage or corrosion.

  3. 3
    Check 3

    Test the Sensor: Use a multimeter to test the resistance of the temperature sensor. The resistance should change with temperature. If the sensor is shorted (reads near zero ohms) or open (reads infinite ohms), it needs to be replaced.

A quick explanation

What does F4 mean?

Indicates a heating fault, which could be related to the dryer thermostat, heater element, or outlet sensor.

The answer you came for

How to fix Electrolux dryer error F4

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Unplug the dryer from the wall outlet to ensure your safety before beginning any work.

  2. 2

    Step 2

    2. Check your home's circuit breaker panel. Dryers use two breakers, and if one has tripped, the drum might spin with no heat. Reset the breakers by turning them fully off and then on again.

  3. 3

    Step 3

    3. Thoroughly inspect the full length of your dryer's exhaust vent hose, from the back of the machine to the outside of your house. Look for any kinks, crushing, or blockages and clear any lint buildup you find.

  4. 4

    Step 4

    4. Remove and clean the dryer's lint filter screen, ensuring all lint and debris are gone to allow for proper airflow.

  5. 5

    Step 5

    5. Once the external checks are complete, plug the dryer back in and try running a timed dry cycle to see if the error returns.

  6. 6

    Step 6

    6. If the F4 code reappears, the fault is internal. This code indicates a problem with the heating system, which could be the main control board or the motor.

  7. 7

    Step 7

    7. Due to the high voltage involved and the complexity of testing and replacing these internal parts, it is highly recommended to schedule a service appointment with a qualified appliance technician to complete the repair safely.

Read the additional checks from the current guide

How to Fix F4 Error (Step-by-Step) Unplug the dryer from the wall outlet to ensure your safety before beginning any work.Check your home's circuit breaker panel. Dryers use two breakers, and if one has tripped, the drum might spin with no heat. Reset the breakers by turning them fully off and then on again.Thoroughly inspect the full length of your dryer's exhaust vent hose, from the back of the machine to the outside of your house. Look for any kinks, crushing, or blockages and clear any lint buildup you find.Remove and clean the dryer's lint filter screen, ensuring all lint and debris are gone to allow for proper airflow.Once the external checks are complete, plug the dryer back in and try running a timed dry cycle to see if the error returns.If the F4 code reappears, the fault is internal. This code indicates a problem with the heating system, which could be the main control board or the motor.Due to the high voltage involved and the complexity of testing and replacing these internal parts, it is highly recommended to schedule a service appointment with a qualified appliance service to complete the repair safely.Turn the appliance off, wait about 2 minutes, then turn it back on. Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect. Recommended Parts to Check No exact official OEM part number is listed here because the correct Electrolux dryer part can vary by complete model number. These are targeted part-category searches, not universal fit claims. Electrolux dryer thermal fuse Common replacement category: Thermal fuse Fit note: Exact OEM part number varies by complete Electrolux dryer model number. Confirm compatibility before buying. Why this category can matter: no-heat or no-start symptoms after venting and power checks. Search Amazon for Electrolux dryer thermal fuse Electrolux dryer heating element Common replacement category: Heating element Fit note: Exact OEM part number varies by complete Electrolux dryer model number. Confirm compatibility before buying. Why this category can matter: electric dryer no-heat symptoms after airflow checks. Search Amazon for Electrolux dryer heating element Electrolux dryer door switch Common replacement category: Door switch Fit note: Exact OEM part number varies by complete Electrolux dryer model number. Confirm compatibility before buying. Why this category can matter: start or cycle-interrupt symptoms tied to door movement. Search Amazon for Electrolux dryer door switch Before ordering: match the part to the complete Electrolux dryer model number on the appliance tag.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Faulty outlet temperature sensor
  • Faulty inlet temperature sensor
  • Corroded or damaged sensor wiring

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Replacement part

OEM candidate: 134587700

Price noted in the current guide: $100-$300

Why this part is shown: It is associated with Electrolux Dryer error F4 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dryer?

If repairing this dryer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Electrolux Dryer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

The form will be enabled after the existing subscriber database and PDF delivery are connected securely.

No spam. Unsubscribe anytime.