Error Code: E39 Difficulty: Hard
Problem: Malfunction of the water overflow level sensor.
How to Fix E39 Error (Step-by-Step)
- Unplug the washing machine from the wall outlet to prevent any electrical shock.
- Turn off the water supply valves connected to the washer.
- Access the pressure sensor by removing the top panel of the washer, which is typically held in place by screws on the back or sides.
- Locate the water level pressure sensor. It’s a small, round part with a thin rubber tube and a wire harness connected to it, usually mounted near the top of the machine’s cabinet.
- Carefully inspect the thin rubber tube connected to the sensor for any signs of kinks, clogs, or damage. Disconnect the tube from the sensor and gently blow through it to clear any potential blockage in the air trap at the other end.
- Examine the wiring and the plastic connector attached to the sensor. Ensure the connection is tight and that there are no signs of corrosion or damage to the wires.
- Reattach the top panel, restore power and water to the machine, and start a new cycle to check if the error is cleared.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Parts to Check
No exact official OEM part number is listed here because the correct Electrolux washer part can vary by complete model number. These are targeted part-category searches, not universal fit claims.
-
Electrolux washer drain pumpCommon replacement category: Drain pumpFit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying.Why this category can matter: drain, no-spin, or water-removal symptoms after hose and filter checks.
-
Electrolux washer water inlet valveCommon replacement category: Water inlet valveFit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying.Why this category can matter: fill and slow-fill symptoms after supply checks.
-
Electrolux washer door lockCommon replacement category: Door lock / latchFit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying.Why this category can matter: start, lock, or spin symptoms tied to door-lock feedback.
Before ordering: match the part to the complete Electrolux washer model number on the appliance tag.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair
Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
For repair parts, verify exact fit with the full washer model number before buying; these links are general replacement-appliance shopping options.
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Why Upgrade via Amazon?
- Fast, Scheduled Delivery – You pick the date and time
- Expert Installation – Professional setup available for most models
- Old Appliance Haul-away – They’ll take your broken unit when they leave
- Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Leave a Reply