Skip to main content
Appliance Fix Guide

Electrolux Dryer error code

Electrolux Dryer Error EA5

Fatal error of the main control.

Fatal error of the main control.

Updated Aug 18, 2026
⚠️ CHECK WARRANTY / AGE$100 - $250 Range
Electrolux dryer repair guide for error EA5
Error codeEA5Dryer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Unplug the dryer for at least 5-10 minutes to reset the electronics.

  2. 2
    Check 2

    Visually check the electronic control board for any signs of damage like burns or loose connections.

  3. 3
    Check 3

    Ensure the dryer is receiving a stable power supply.

A quick explanation

What does EA5 mean?

Fatal error of the main control.

The answer you came for

How to fix Electrolux dryer error EA5

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Turn off the power to the dryer by unplugging it from the wall outlet.

  2. 2

    Step 2

    2. Remove the top panel of the dryer by taking out the screws located on the back edge.

  3. 3

    Step 3

    3. Identify the main control board inside the dryer. It is usually a green circuit board inside a plastic case.

  4. 4

    Step 4

    4. Before touching any wires, take a detailed photograph to remember where each connector goes.

  5. 5

    Step 5

    5. Carefully unplug all the wire harnesses connected to the control board. Remove the screws that hold the board in its housing and lift it out.

  6. 6

    Step 6

    6. Position the new control board in place and secure it with the mounting screws. Reconnect all the wire harnesses according to your reference photo.

  7. 7

    Step 7

    7. Replace the top panel and its screws. Plug the dryer back in and test its operation by starting a new cycle.

Read the additional checks from the current guide

How to Fix EA5 Error (Step-by-Step) Turn off the power to the dryer by unplugging it from the wall outlet.Remove the top panel of the dryer by taking out the screws located on the back edge.Identify the main control board inside the dryer. It is usually a green circuit board inside a plastic case.Before touching any wires, take a detailed photograph to remember where each connector goes.Carefully unplug all the wire harnesses connected to the control board. Remove the screws that hold the board in its housing and lift it out.Position the new control board in place and secure it with the mounting screws. Reconnect all the wire harnesses according to your reference photo.Replace the top panel and its screws. Plug the dryer back in and test its operation by starting a new cycle.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Electrolux Dryer Focused repair path: dryer airflow, heating, motor, sensor, and control checks. Do not treat the fault as reset-only if it keeps returning; use the failed function to choose the next test. Disconnect power before opening panels, then confirm whether the Electrolux dryer repeats the same code after a clean reset. Match the symptom to the part of the cycle or function that fails: fill, drain, heat, cool, spin, latch, ignite, fan, sensor, or control response. Inspect simple causes first: airflow, water supply, drain path, door closure, filter, venting, wiring connectors, and visible damage. Use meter testing or service diagnostics before replacing electronic controls, because wiring, switches, sensors, and loads can mimic board failure. Use the complete Electrolux dryer model number from the appliance tag before ordering any model-specific part. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Electrolux model number from the appliance tag before ordering. &tag=appliancefixg-20Verified Compatible Alternatives:809160404

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Defect or malfunction in the electronic control board.
  • Power fluctuations or unstable power supply.
  • Faulty wiring.

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Replacement part

OEM candidate: 809160304

Price noted in the current guide: $146-$259

Why this part is shown: It is associated with Electrolux Dryer error EA5 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dryer?

If repairing this dryer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, FREE delivery on eligible items

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Electrolux Dryer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.

Reviewed by the Appliance Fix Guide Editorial Team

Last reviewed and updated Jun 22, 2026 · Educational repair guidance, not a professional diagnosis

  • Researched against manufacturer documentation and service literature where available.
  • Safety-first structure: every guide starts with the safest first action and states when to stop and call a professional.
  • Part compatibility is treated cautiously: fitment must be confirmed against the exact model number before purchase.