Error Code: E36 Difficulty: Hard
Problem: Breakdown of the sensor that prevents the heating element from turning on without the required water level.
How to Fix E36 Error (Step-by-Step)
- Unplug the washing machine from the wall outlet to completely disconnect the power.
- To access the internal components, remove the top panel of the washer by unscrewing the retaining screws located on the back of the machine.
- Locate the water level sensor, which is typically a round part near the top of the machine with a wiring harness and a small rubber hose connected to it.
- Carefully inspect the wiring and the plastic connector plug at the sensor. Ensure the plug is seated firmly and that there are no broken, burnt, or corroded wires.
- Disconnect the thin rubber hose from the sensor and check it for any cracks, kinks, or blockages. You can blow gently through the hose towards the drum to confirm the air path is clear.
- Since this error points to a breakdown in the sensor’s circuitry, the issue often lies with the sensor itself or the main control board’s ability to read the sensor. This requires specialized check tools.
- Due to the risk of electrical shock and the complexity of testing the heater safety circuit, it is strongly recommended to have a qualified service diagnose and resolve the issue.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair
Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Why Upgrade via Amazon?
- Fast, Scheduled Delivery – You pick the date and time
- Expert Installation – Professional setup available for most models
- Old Appliance Haul-away – They’ll take your broken unit when they leave
- Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Leave a Reply