⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: E32 Difficulty: Hard
Problem: Calibration problem with the pressure switch.
How to Fix E32 Error (Step-by-Step)
- Disconnect the washer from its power source to ensure safety.
- Access the pressure switch by removing the top or back panel of the washer.
- Check the thin tube connected to the pressure switch for any kinks, blockages, or damage. Straighten any kinks or clear any debris.
- Disconnect and then firmly reconnect the electrical connectors on the pressure switch to ensure a solid connection.
- If the tube and connections are fine, the pressure switch itself may be faulty and needs replacement.
- Unscrew or unclip the old switch, install the new one, and reconnect the tube and wires.
- Put the washer back together, restore power, and run a cycle to see if the calibration issue is resolved.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 134762010
- 5304511335
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply