Skip to main content
Appliance Fix Guide

Electrolux Washer error code

Electrolux Washer Error E30

Water pressure sensor problem.

Water pressure sensor problem.

Updated Aug 18, 2026
Diagnose before buying a part
Electrolux washer repair guide for error E30
Error codeE30Washer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Reset the power to the appliance by unplugging it for 30 seconds.

  2. 2
    Check 2

    Check the rubber tube connected to the pressure switch for blockages.

  3. 3
    Check 3

    Inspect the bottom of the machine for any water leaks.

A quick explanation

What does E30 mean?

Water pressure sensor problem.

The answer you came for

How to fix Electrolux washer error E30

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Safety First: Disconnect the washer from its power source by unplugging it from the wall outlet.

  2. 2

    Step 2

    2. Access the Component: Remove the top panel of the washing machine. This is usually done by removing a few screws from the back of the panel and sliding it backward.

  3. 3

    Step 3

    3. Locate the Pressure Sensor: Look for a small, round part near the top of the machine with a thin rubber or plastic tube and a wire connector attached. This is the water pressure sensor.

  4. 4

    Step 4

    4. Inspect the Air Hose: Carefully disconnect the thin air hose from the sensor. Inspect the hose for any cracks, kinks, or blockages. Blow gently through the hose towards the drum to ensure it is clear.

  5. 5

    Step 5

    5. Disconnect the Old Sensor: If the hose is clear, the sensor is likely faulty. Disconnect the electrical wire harness from the old sensor. It may be held in place by a single screw or a plastic clip; remove it.

  6. 6

    Step 6

    6. Install the New Sensor: Mount the new pressure sensor (Part #134762000 or #134762010) in place, securing it with the original screw or clip. Reconnect the electrical harness and the air hose securely.

  7. 7

    Step 7

    7. Reassemble and Test: Replace the top panel and secure it with its screws. Plug the washer back in and start a cycle to confirm that the water level is now being sensed correctly and the error is gone.

Read the additional checks from the current guide

How to Fix E30 Error (Step-by-Step) Safety First: Disconnect the washer from its power source by unplugging it from the wall outlet. Access the Component: Remove the top panel of the washing machine. This is usually done by removing a few screws from the back of the panel and sliding it backward. Locate the Pressure Sensor: Look for a small, round part near the top of the machine with a thin rubber or plastic tube and a wire connector attached. This is the water pressure sensor. Inspect the Air Hose: Carefully disconnect the thin air hose from the sensor. Inspect the hose for any cracks, kinks, or blockages. Blow gently through the hose towards the drum to ensure it is clear. Disconnect the Old Sensor: If the hose is clear, the sensor is likely faulty. Disconnect the electrical wire harness from the old sensor. It may be held in place by a single screw or a plastic clip; remove it. Install the New Sensor: Mount the new pressure sensor (Part #134762000 or #134762010) in place, securing it with the original screw or clip. Reconnect the electrical harness and the air hose securely. Reassemble and Test: Replace the top panel and secure it with its screws. Plug the washer back in and start a cycle to confirm that the water level is now being sensed correctly and the error is gone. Turn the appliance off, wait about 2 minutes, then turn it back on. Verified Compatible Alternatives: 134762010 Recommended Parts to Check No exact official OEM part number is listed here because the correct Electrolux washer part can vary by complete model number. These are targeted part-category searches, not universal fit claims. Electrolux washer drain pump Common replacement category: Drain pump Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: drain, no-spin, or water-removal symptoms after hose and filter checks. Search Amazon for Electrolux washer drain pump Electrolux washer water inlet valve Common replacement category: Water inlet valve Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: fill and slow-fill symptoms after supply checks. Search Amazon for Electrolux washer water inlet valve Electrolux washer door lock Common replacement category: Door lock / latch Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: start, lock, or spin symptoms tied to door-lock feedback. Search Amazon for Electrolux washer door lock Before ordering: match the part to the complete Electrolux washer model number on the appliance tag. Still Not Working? If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure. Browse all Electrolux error codes: Electrolux Error Codes

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Water leak detected at the bottom of the machine.
  • Blocked pressure switch hose.
  • Faulty pressure switch/sensor.

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Pressure Switch/Sensor (part number varies by model)

Price noted in the current guide: $30-$85

Why this part is shown: It is associated with Electrolux Washer error E30 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Electrolux Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

The form will be enabled after the existing subscriber database and PDF delivery are connected securely.

No spam. Unsubscribe anytime.