Error Code: E11 Difficulty: Moderate
Problem: The appliance is not filling with water during the washing phase of the cycle.
How to Fix E11 Error (Step-by-Step)
- Verify that both water supply taps are fully open and that the inlet hoses are not kinked or clogged.
- Unplug the washer. Turn off the water supply and disconnect the inlet hoses from the machine.
- Check and clean the small filter screens located inside the washer’s water inlet ports.
- If the screens are clean and water pressure to the machine is good, the water inlet valve may be faulty.
- To replace the valve, remove the top panel of the washer to access it. Disconnect the wire harnesses and hoses from the old valve.
- Remove the screws holding the valve in place and install the new one, ensuring all connections are secure.
- Reassemble the washer, turn on the water, and plug the machine in to test the filling process.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Verified Compatible Alternatives:
- 134637810
- 137353500
- 5303207418
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair
Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Why Upgrade via Amazon?
- Fast, Scheduled Delivery – You pick the date and time
- Expert Installation – Professional setup available for most models
- Old Appliance Haul-away – They’ll take your broken unit when they leave
- Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Leave a Reply