Error Code: E05 Difficulty: Moderate
Problem: High water temperature.
How to Fix E05 Error (Step-by-Step)
- Unplug the washer from the electrical outlet to ensure safety.
- Turn off both the hot and cold water supply valves connected to the washer.
- Locate the temperature sensor (thermistor), which is typically found near the heating element at the base of the wash tub. You may need to remove a front or rear access panel.
- Disconnect the wire harness from the sensor. Use a multimeter set to Ohms to test the sensor’s resistance. A healthy sensor will show a reading that changes with temperature; an infinite reading or no reading indicates a faulty sensor.
- If the sensor is faulty, remove it from the tub. It is often held in place by a rubber grommet.
- Install the new temperature sensor, ensuring the grommet creates a watertight seal.
- Reconnect the wire harness, reassemble any panels you removed, and restore power and water to the washer before testing.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Verified Compatible Alternatives:
- 472991322
- EM3642-01
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair
Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Why Upgrade via Amazon?
- Fast, Scheduled Delivery – You pick the date and time
- Expert Installation – Professional setup available for most models
- Old Appliance Haul-away – They’ll take your broken unit when they leave
- Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Leave a Reply