Electrolux Dryer Error E32

How to Fix E32 Error (Step-by-Step) Disconnect the dryer from the electrical outlet to prevent shock.Locate the moisture sensor bars (Part 134786110) inside the dryer drum. Inspect them for any foreign objects, such as a coin or paperclip, that could be shorting them out.Clean the sensor bars with rubbing alcohol and a clean cloth to remove any potential conductive residue.Access the back of the moisture sensor and inspect the wire harness (Part 5304515376). Ensure the wires are not pinched, frayed, or shorting against the dryer's metal chassis.Disconnect the sensor harness from the main control board and test the sensor circuit for continuity. A continuous short indicates a problem with the wiring or sensors.If the sensors and wiring are in good condition, the problem points to a failure in the main control board (Part 134994700), which will need to be replaced.Carefully install the new control board, reconnect all harnesses, and reassemble the unit.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Electrolux Dryer Focused repair path: dryer airflow, heating, motor, sensor, and control checks. Do not treat the fault as reset-only if it keeps returning; use the failed function to choose the next test. Disconnect power before opening panels, then confirm whether the Electrolux dryer repeats the same code after a clean reset. Match the symptom to the part of the cycle or function that fails: fill, drain, heat, cool, spin, latch, ignite, fan, sensor, or control response. Inspect simple causes first: airflow, water supply, drain path, door closure, filter, venting, wiring connectors, and visible damage. Use meter testing or service diagnostics before replacing electronic controls, because wiring, switches, sensors, and loads can mimic board failure. Use the complete Electrolux dryer model number from the appliance tag before ordering any model-specific part. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Electrolux model number from the appliance tag before ordering. &tag=appliancefixg-20Verified Compatible Alternatives:1347861101349947005304515376