Electrolux Dryer error code
Electrolux Dryer Error E22
Condensate pump is defective or blocked.
Condensate pump is defective or blocked.
Try these first
Start here before buying a part or taking the appliance apart.
- 1Check 1
Power cycle the unit by unplugging it for several minutes to see if the code clears.
- 2Check 2
Check the wiring between the drain pump and the main control board for any damage or loose connections.
- 3Check 3
Ensure there are no clogs in the drain pump or reservoir.
A quick explanation
What does E22 mean?
Condensate pump is defective or blocked.
The answer you came for
How to fix Electrolux dryer error E22
Start with the safest checks and work from simple to technical.
- 1
Step 1
1. Turn off and unplug the dryer.
- 2
Step 2
2. Locate the condensate pump (Part 134523200). This is often found at the base of the unit.
- 3
Step 3
3. Inspect the pump and its connected hoses (Part 137249900) for any visible blockages or lint buildup.
- 4
Step 4
4. Disconnect the hoses from the pump and flush them with water to ensure they are clear.
- 5
Step 5
5. Check the pump's impeller to see if it can move freely. If it is stuck or broken, the pump needs to be replaced.
- 6
Step 6
6. If the pump and hoses are clear, use a multimeter to test the pump motor for continuity. If there is no continuity, replace the pump.
- 7
Step 7
7. Reassemble all components and test the dryer.
Read the additional checks from the current guide
How to Fix E22 Error (Step-by-Step) Turn off and unplug the dryer and confirm the error stays cleared during a full test cycle.Locate the condensate pump (Part 134523200). This is often found at the base of the unit.Inspect the pump and its connected hoses (Part 137249900) for any visible blockages or lint buildup.Disconnect the hoses from the pump and flush them with water to ensure they are clear.Check the pump's impeller to see if it can move freely. If it is stuck or broken, the pump needs to be replaced.If the pump and hoses are clear, use a multimeter to test the pump motor for continuity. If there is no continuity, replace the pump.Reassemble all components and test the dryer and confirm the error stays cleared during a full test cycle.Turn the appliance off, wait about 2 minutes, then turn it back on.
What to Check Next on This Electrolux Dryer Focused repair path: dryer airflow, heating, motor, sensor, and control checks. Do not treat the fault as reset-only if it keeps returning; use the failed function to choose the next test. Disconnect power before opening panels, then confirm whether the Electrolux dryer repeats the same code after a clean reset. Match the symptom to the part of the cycle or function that fails: fill, drain, heat, cool, spin, latch, ignite, fan, sensor, or control response. Inspect simple causes first: airflow, water supply, drain path, door closure, filter, venting, wiring connectors, and visible damage. Use meter testing or service diagnostics before replacing electronic controls, because wiring, switches, sensors, and loads can mimic board failure. Use the complete Electrolux dryer model number from the appliance tag before ordering any model-specific part. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Electrolux model number from the appliance tag before ordering. &tag=appliancefixg-20Verified Compatible Alternatives:137249900
What may be causing it?
- Main control board failure
- Damaged or loose wiring to the drain pump
- Clogs in the drain pump or reservoir
These are possibilities to investigate, not proof that one part has failed.
Recommended part
Recommended part for this error code
Replacement part
OEM candidate: 134994700
Price noted in the current guide: $140-$190
Why this part is shown: It is associated with Electrolux Dryer error E22 in the current guide. The error code alone does not prove this part has failed.
Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.
You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.
Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.Replacement options
Ready to replace your dryer?
If repairing this dryer no longer feels worthwhile, compare three replacement paths below.
Why shop your replacement on Amazon?
-
Fast, free delivery
Prime members can get fast, free delivery on eligible items.
-
Convenient delivery options
Select large appliances may offer scheduled or Room of Choice delivery.
-
Haul-away options
Haul-away may be available for select appliances and delivery areas.
-
Installation help
Installation or assembly may be available on select items.
Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.
Value
$0-$599
Budget-friendly dryers in the $0-$599 range.
Shop Value Options on AmazonBest Overall
$600-$999
Balanced dryers in the $600-$999 range.
Shop Best Overall Options on AmazonPremium
$1,000-$2,500
Higher-end dryers in the $1,000-$2,500 range.
Shop Premium Options on AmazonMake the money decision
Repair or replace calculator
Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.
Safety first
Disconnect power before opening panels or touching internal parts.
When to stop
- Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
- Do not perform live-voltage testing unless you are trained and equipped for it.
- Use the exact model manual or service information before replacing electronic controls.
Free quick sheet
Get the Electrolux Dryer Error Code Quick Sheet
A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.
No spam. Unsubscribe anytime.