How to Fix Electrolux Dryer Error E14

Electrolux Dryer Error E14 overlay image

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: E14 Difficulty: Hard

Problem: Gas error – A flame was not detected on gas-heated dryers.

⚖️ Repair Decision
✅ WORTH FIXING

Parts under $100

How to Fix E14 Error (Step-by-Step)

  1. Turn off the gas supply to the dryer at the shutoff valve.
  2. Unplug the dryer from the electrical outlet for safety and confirm the error stays cleared during a full test cycle.
  3. Access the burner assembly, which may require removing the front or lower access panel.
  4. Inspect the igniter (part WE4X693 or 137524000) for any visible cracks or damage. A faulty igniter is a common cause.
  5. Check the flame sensor (part 137524000 or 5303281135) to ensure it is clean and positioned correctly in the path of the flame.
  6. Test the gas valve solenoids (kit 279834 or 5303931775) with a multimeter for proper resistance. If they fail the test, they must be replaced.
  7. After replacing any faulty components, carefully reassemble the dryer, turn the gas back on, and test for proper operation.
  8. Turn the appliance off, wait about 2 minutes, then turn it back on.

Recommended Replacement Part

OEM Part #: 279834

Estimated Market Price: $10-$115

Check Price & Availability →
&tag=appliancefixg-20

Verified Compatible Alternatives:

  • WE4X692
  • WE4X693
  • 134393700

When It’s Better to Replace Than Repair

Dryer repairs are often worth it for small parts, but repeated heating, motor, drum, or control failures can point toward replacement.
Confirm gas vs electric, venting, voltage, doorway clearance, and laundry-space dimensions before ordering.
For repair parts, verify exact fit with the full dryer model number before buying; these links are general replacement-appliance shopping options.

  • [OK]Thermal fuse or heater failures keep returning
  • [OK]Belt, roller, or motor repairs exceed unit value
  • [OK]Door switch or control issues stack with other faults
  • [OK]Older dryer has long dry times even after vent cleaning

Recommended Dryer Replacement Options

Electric Dryers

240V Vented Models

  • Most common electric replacement type
  • Confirm 3-prong vs 4-prong cord needs
  • Verify vent path and laundry-space depth

Shop Electric Dryers

Gas Dryers

Natural Gas Dryer Options

  • Confirm gas supply and shutoff location
  • Use qualified installation when required
  • Do not substitute electric for gas without planning

Compare Gas Dryers

Compact and Ventless

Small-Space Dryer Choices

  • Good for apartments and tight closets
  • Confirm ventless condensation requirements
  • Check capacity before replacing full-size units

View Compact Dryers

As an Amazon Associate, we earn from qualifying purchases.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

💬 Chat with a Certified Technician Now

Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)

⚡ Don’t Risk a DIY Fail!

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download


Browse More Codes

📖 View All Error Codes

Expert: Mike Sullivan

EPA Section 608 Certified Technician with 18+ years experience.

Read Editorial Standards →

Browse all Electrolux error codes: Electrolux Error Codes

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *