How to Fix Electrolux dryer Error EH1

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: EH1 Difficulty: Easy

Problem: Power supply frequency out of range.

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

no_parts

How to Fix EH1 Error (Step-by-Step)

Unplug the dryer from the power outlet and confirm the error stays cleared during a full test cycle.
Wait for at least 60 seconds to allow the internal electronics to reset.
Plug the dryer back into a dedicated outlet, ensuring it is not on a shared circuit with other major appliances.
Check your home’s circuit breaker or fuse box to ensure the dryer’s circuit is not overloaded.
If the problem persists, consult an electrician to check the frequency of your home’s power supply.
Turn the appliance off, wait about 2 minutes, then turn it back on.
Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.