GE Refrigerator error code
GE Refrigerator Error D8-AND-D9-ILLUMINATED-2
Refrigerator and defrost sensor issue.
Refrigerator and defrost sensor issue.
Try these first
Start here before buying a part or taking the appliance apart.
- 1Disconnect the refrigerator from its power source to
Disconnect the refrigerator from its power source to prevent electrical shock.
- 2First, replace the refrigerator sensor (thermistor) located in
First, replace the refrigerator sensor (thermistor) located in the fresh food section by following the steps for the 'D8' error code.
- 3Next, empty the freezer compartment and remove the
Next, empty the freezer compartment and remove the screws holding the interior back panel.
A quick explanation
What does D8-AND-D9-ILLUMINATED-2 mean?
Refrigerator and defrost sensor issue.
The answer you came for
How to fix GE refrigerator error D8-AND-D9-ILLUMINATED-2
Start with the safest checks and work from simple to technical.
- 1
Disconnect the refrigerator from its power source to
Disconnect the refrigerator from its power source to prevent electrical shock.
- 2
First, replace the refrigerator sensor (thermistor) located in
First, replace the refrigerator sensor (thermistor) located in the fresh food section by following the steps for the 'D8' error code.
- 3
Next, empty the freezer compartment and remove the
Next, empty the freezer compartment and remove the screws holding the interior back panel.
- 4
Carefully detach the panel to expose the evaporator
Carefully detach the panel to expose the evaporator coils. The defrost sensor is a small component clipped directly onto the evaporator tubing.
- 5
Unplug the wire connector for the old defrost
Unplug the wire connector for the old defrost sensor and remove it from the clip.
- 6
Install the new defrost sensor by clipping it
Install the new defrost sensor by clipping it onto the tubing and reconnecting the wire harness.
- 7
Reinstall the freezer's back panel, restore power to
Reinstall the freezer's back panel, restore power to the unit, and monitor for normal operation.
- 8
Turn the appliance off, wait about 2 minutes,
Turn the appliance off, wait about 2 minutes, then turn it back on.
Read the additional checks from the current guide
How to Fix D8 AND D9 ILLUMINATED Error (Step-by-Step) Disconnect the refrigerator from its power source to prevent electrical shock.First, replace the refrigerator sensor (thermistor) located in the fresh food section by following the steps for the 'D8' error code.Next, empty the freezer compartment and remove the screws holding the interior back panel.Carefully detach the panel to expose the evaporator coils. The defrost sensor is a small component clipped directly onto the evaporator tubing.Unplug the wire connector for the old defrost sensor and remove it from the clip.Install the new defrost sensor by clipping it onto the tubing and reconnecting the wire harness.Reinstall the freezer's back panel, restore power to the unit, and monitor for normal operation.Turn the appliance off, wait about 2 minutes, then turn it back on.
What to Check Next on This Amana Refrigerator Focused repair path: refrigerator door, airflow, thermistor, defrost, fan, compressor start, and control checks. Do not treat a returning fault as a reset-only problem; use the point in the cycle where the fault appears to choose the next check. Confirm the doors seal, the interior lights shut off, and vents are not blocked before replacing sensors or boards. Look for frost pattern clues, stalled fans, warm compartments, water or ice symptoms, and recent power interruptions. For temperature faults, inspect the evaporator fan, thermistor, defrost path, damper, condenser airflow, and board connectors. Use the complete Amana refrigerator model number before ordering sensors, fans, boards, dampers, valves, or start components. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Amana model number from the appliance tag before ordering. Similar error wording can use different valves, sensors, pumps, motors, heaters, locks, switches, fans, or control boards depending on the exact model. &tag=appliancefixg-20Verified Compatible Alternatives:Refrigerator Sensor (Thermistor)
Recommended part
Recommended part for this error code
Part listed in the current guide
OEM candidate: Defrost Sensor
Price noted in the current guide: $40-$95
Why this part is shown: It is associated with GE Refrigerator error D8-AND-D9-ILLUMINATED-2 in the current guide. The error code alone does not prove this part has failed.
Compatibility varies by model. Confirm that the Amazon listing includes your complete refrigerator model number before ordering.
You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.
Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.Replacement options
Ready to replace your refrigerator?
If repairing this refrigerator no longer feels worthwhile, compare three replacement paths below.
Why shop your replacement on Amazon?
-
Fast, free delivery
Prime members can get fast, free delivery on eligible items.
-
Convenient delivery options
Select large appliances may offer scheduled or Room of Choice delivery.
-
Haul-away options
Haul-away may be available for select appliances and delivery areas.
-
Installation help
Installation or assembly may be available on select items.
Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.
Value
$0-$999
Budget-friendly refrigerators in the $0-$999 range.
Shop Value Options on AmazonBest Overall
$1,000-$1,999
Balanced refrigerators in the $1,000-$1,999 range.
Shop Best Overall Options on AmazonPremium
$2,000-$5,000
Higher-end refrigerators in the $2,000-$5,000 range.
Shop Premium Options on AmazonMake the money decision
Repair or replace calculator
Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.
Safety first
Disconnect power before opening panels or touching internal parts.
When to stop
- Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
- Do not perform live-voltage testing unless you are trained and equipped for it.
- Use the exact model manual or service information before replacing electronic controls.
Free quick sheet
Get the GE Refrigerator Error Code Quick Sheet
A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.
No spam. Unsubscribe anytime.