How to Fix Amana Dishwasher Error F8E1

Error Code: F8E1 Difficulty: Moderate

Problem: Slow drain.

How to Fix F8E1 Error (Step-by-Step)

1. First, perform a basic cleaning. Remove the bottom dish rack and unscrew the filter assembly at the bottom of the tub. Clean it thoroughly under running water.
2. Check the drain hose for any visible kinks or blockages. It’s the corrugated hose running from the dishwasher to your sink’s plumbing.
3. Disconnect the drain hose from the garbage disposal or sink drain and place the end in a bucket. Start a ‘Drain’ cycle to see if water pumps out forcefully. If it does, the clog is in your sink plumbing.
4. If water flow is weak, turn off power to the dishwasher at the circuit breaker. You will need to pull the dishwasher out from under the counter to access the drain pump.
5. Disconnect the hoses from the drain pump (Part WPW10348269) and check its inlet and outlet ports for debris.
6. If no clogs are found, the pump motor is likely weak and needs to be replaced.
7. After clearing a clog or replacing the pump, reinstall the dishwasher, reconnect all hoses, and run a test cycle.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Amana error codes: Amana Error Codes