Skip to main content
Appliance Fix Guide

Amana Dryer error code

Amana Dryer Error F29

General error requiring a power cycle.

General error requiring a power cycle.

ModerateStart with 5-15 minutes of safe checks
✅ WORTH FIXINGParts under $100
Amana dryer repair guide for error F29
Error codeF29Dryer

Start here before buying a part or taking the appliance apart.

  1. 1
    Disconnect the power cord from the wall outlet

    Disconnect the power cord from the wall outlet before beginning the repair.

  2. 2
    Open the dryer door to access the area

    Open the dryer door to access the area around the opening.

  3. 3
    Remove the screws holding the top panel of

    Remove the screws holding the top panel of the dryer on, located at the rear of the machine, and slide the top panel off.

A quick explanation

What does F29 mean?

General error requiring a power cycle.

The answer you came for

How to fix Amana dryer error F29

Start with the safest checks and work from simple to technical.

  1. 1

    Disconnect the power cord from the wall outlet

    Disconnect the power cord from the wall outlet before beginning the repair.

  2. 2

    Open the dryer door to access the area

    Open the dryer door to access the area around the opening.

  3. 3

    Remove the screws holding the top panel of

    Remove the screws holding the top panel of the dryer on, located at the rear of the machine, and slide the top panel off.

  4. 4

    Locate the door switch, which is typically found

    Locate the door switch, which is typically found near the top of the door opening.

  5. 5

    Disconnect the wire harness that plugs into the

    Disconnect the wire harness that plugs into the door switch.

  6. 6

    Depress the small locking tabs on the side

    Depress the small locking tabs on the side of the switch and push it out from the front panel.

  7. 7

    Snap the new door switch into place from

    Snap the new door switch into place from the front, reconnect the wire harness from behind, and reassemble the top panel.

  8. 8

    Turn the appliance off, wait about 2 minutes,

    Turn the appliance off, wait about 2 minutes, then turn it back on.

Read the additional checks from the current guide

How to Fix F29 Error (Step-by-Step) Disconnect the power cord from the wall outlet before beginning the repair.Open the dryer door to access the area around the opening.Remove the screws holding the top panel of the dryer on, located at the rear of the machine, and slide the top panel off.Locate the door switch, which is typically found near the top of the door opening.Disconnect the wire harness that plugs into the door switch.Depress the small locking tabs on the side of the switch and push it out from the front panel.Snap the new door switch into place from the front, reconnect the wire harness from behind, and reassemble the top panel.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Amana Dryer Focused repair path: dryer airflow, heating, sensor, motor, door switch, belt, and control checks. Do not treat a returning fault as a reset-only problem; use the point in the cycle where the fault appears to choose the next check. Disconnect power before inspection, then clear the lint screen, blower area, vent run, and exterior hood before replacing heat parts. Confirm whether the dryer starts, tumbles, heats, and advances through the cycle; the missing function narrows the repair path. For heat faults, inspect airflow first, then the thermal fuse, thermistor, element or gas ignition path, wiring, and control output. For start or tumble faults, check the door switch, belt switch, motor circuit, harness, and control connections before ordering parts. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Amana model number from the appliance tag before ordering. Similar error wording can use different valves, sensors, pumps, motors, heaters, locks, switches, fans, or control boards depending on the exact model. &tag=appliancefixg-20

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

Part listed in the current guide

OEM candidate: Door Switch

Price noted in the current guide: $20-$50

Why this part is shown: It is associated with Amana Dryer error F29 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dryer?

If repairing this dryer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Amana Dryer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.