Skip to main content
Appliance Fix Guide

Amana Dryer error code

Amana Dryer Error ERR-2

The dryer door is not completely closed or latched.

The dryer door is not completely closed or latched.

ModerateStart with 5-15 minutes of safe checks
✅ WORTH FIXINGParts under $100
Amana dryer repair guide for error ERR-2
Error codeERR-2Dryer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    First, open the dryer door and close it

    First, open the dryer door and close it firmly to ensure the latch is fully engaged. Check for any clothing or items obstructing the door.

  2. 2
    If the error continues, unplug the dryer from

    If the error continues, unplug the dryer from the power outlet.

  3. 3
    Open the dryer door and locate the door

    Open the dryer door and locate the door switch assembly inside the door frame.

A quick explanation

What does ERR-2 mean?

The dryer door is not completely closed or latched.

The answer you came for

How to fix Amana dryer error ERR-2

Start with the safest checks and work from simple to technical.

  1. 1

    First, open the dryer door and close it

    First, open the dryer door and close it firmly to ensure the latch is fully engaged. Check for any clothing or items obstructing the door.

  2. 2

    If the error continues, unplug the dryer from

    If the error continues, unplug the dryer from the power outlet.

  3. 3

    Open the dryer door and locate the door

    Open the dryer door and locate the door switch assembly inside the door frame.

  4. 4

    Use a putty knife to release the two

    Use a putty knife to release the two clips holding the top panel down, located in the gap between the top and front panels. Hinge the top panel up and back.

  5. 5

    From the inside, locate the door switch

    From the inside, locate the door switch. Unscrew it from the front panel and disconnect its wire harness.

  6. 6

    Connect the new door switch (Parts

    Connect the new door switch (Parts: 279570, WPW10610880), screw it back into the front panel.

  7. 7

    Lower the top panel and snap it back

    Lower the top panel and snap it back into place. Plug the dryer in and test by starting a cycle.

  8. 8

    Turn the appliance off, wait about 2 minutes,

    Turn the appliance off, wait about 2 minutes, then turn it back on.

Read the additional checks from the current guide

How to Fix ERR Error (Step-by-Step) First, open the dryer door and close it firmly to ensure the latch is fully engaged. Check for any clothing or items obstructing the door.If the error continues, unplug the dryer from the power outlet.Open the dryer door and locate the door switch assembly inside the door frame.Use a putty knife to release the two clips holding the top panel down, located in the gap between the top and front panels. Hinge the top panel up and back.From the inside, locate the door switch. Unscrew it from the front panel and disconnect its wire harness.Connect the new door switch (Parts: 279570, WPW10610880), screw it back into the front panel.Lower the top panel and snap it back into place. Plug the dryer in and test by starting a cycle.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Amana Dryer Focused repair path: dryer airflow, heating, sensor, motor, door switch, belt, and control checks. Do not treat a returning fault as a reset-only problem; use the point in the cycle where the fault appears to choose the next check. Disconnect power before inspection, then clear the lint screen, blower area, vent run, and exterior hood before replacing heat parts. Confirm whether the dryer starts, tumbles, heats, and advances through the cycle; the missing function narrows the repair path. For heat faults, inspect airflow first, then the thermal fuse, thermistor, element or gas ignition path, wiring, and control output. For start or tumble faults, check the door switch, belt switch, motor circuit, harness, and control connections before ordering parts. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Amana model number from the appliance tag before ordering. Similar error wording can use different valves, sensors, pumps, motors, heaters, locks, switches, fans, or control boards depending on the exact model. &tag=appliancefixg-20Verified Compatible Alternatives:WPW10610880

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

Part listed in the current guide

OEM candidate: 279570

Price noted in the current guide: $15-$40

Why this part is shown: It is associated with Amana Dryer error ERR-2 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dryer?

If repairing this dryer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Amana Dryer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.