Skip to main content
Appliance Fix Guide

Amana Dryer error code

Amana Dryer Error F70

Communication failure between the user interface board and the main control board.

Communication failure between the user interface board and the main control board.

HardStart with 5-15 minutes of safe checks
❌ CONSIDER REPLACINGParts over $250
Amana dryer repair guide for error F70
Error codeF70Dryer

Start here before buying a part or taking the appliance apart.

  1. 1
    Ensure the dryer is completely disconnected from the

    Ensure the dryer is completely disconnected from the power supply by unplugging it.

  2. 2
    Access the dryer's electronic boards by removing the

    Access the dryer's electronic boards by removing the necessary service panels (usually the top or back).

  3. 3
    Identify the user interface board (where you make

    Identify the user interface board (where you make your selections) and the main control board.

A quick explanation

What does F70 mean?

Communication failure between the user interface board and the main control board.

The answer you came for

How to fix Amana dryer error F70

Start with the safest checks and work from simple to technical.

  1. 1

    Ensure the dryer is completely disconnected from the

    Ensure the dryer is completely disconnected from the power supply by unplugging it.

  2. 2

    Access the dryer's electronic boards by removing the

    Access the dryer's electronic boards by removing the necessary service panels (usually the top or back).

  3. 3

    Identify the user interface board (where you make

    Identify the user interface board (where you make your selections) and the main control board.

  4. 4

    Check the wiring that runs between these two

    Check the wiring that runs between these two boards for any loose plugs or visible damage.

  5. 5

    Unplug the connectors on both ends, inspect them

    Unplug the connectors on both ends, inspect them for any bent or corroded pins, and then plug them back in firmly.

  6. 6

    If the connections are solid and the wires

    If the connections are solid and the wires are intact, the communication failure is likely due to a faulty main control board (W10756689) or user interface board (W10280652).

  7. 7

    Because it is difficult to determine which board

    Because it is difficult to determine which board is at fault without proper check equipment, professional service is recommended.

  8. 8

    Turn the appliance off, wait about 2 minutes,

    Turn the appliance off, wait about 2 minutes, then turn it back on.

Read the additional checks from the current guide

How to Fix F70 Error (Step-by-Step) Ensure the dryer is completely disconnected from the power supply by unplugging it.Access the dryer's electronic boards by removing the necessary service panels (usually the top or back).Identify the user interface board (where you make your selections) and the main control board.Check the wiring that runs between these two boards for any loose plugs or visible damage.Unplug the connectors on both ends, inspect them for any bent or corroded pins, and then plug them back in firmly.If the connections are solid and the wires are intact, the communication failure is likely due to a faulty main control board (W10756689) or user interface board (W10280652).Because it is difficult to determine which board is at fault without proper check equipment, professional service is recommended.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Amana Dryer Focused repair path: dryer airflow, heating, sensor, motor, door switch, belt, and control checks. Do not treat a returning fault as a reset-only problem; use the point in the cycle where the fault appears to choose the next check. Disconnect power before inspection, then clear the lint screen, blower area, vent run, and exterior hood before replacing heat parts. Confirm whether the dryer starts, tumbles, heats, and advances through the cycle; the missing function narrows the repair path. For heat faults, inspect airflow first, then the thermal fuse, thermistor, element or gas ignition path, wiring, and control output. For start or tumble faults, check the door switch, belt switch, motor circuit, harness, and control connections before ordering parts. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Amana model number from the appliance tag before ordering. Similar error wording can use different valves, sensors, pumps, motors, heaters, locks, switches, fans, or control boards depending on the exact model. Next Steps and Parts &tag=appliancefixg-20Verified Compatible Alternatives:W10756689

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

Part listed in the current guide

OEM candidate: W10280652

Price noted in the current guide: $313-$396

Why this part is shown: It is associated with Amana Dryer error F70 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dryer?

If repairing this dryer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.