How to Fix Bosch Dryer Error E09

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: E09 Difficulty: Hard

Problem: Electronics fault.

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix E09 Error (Step-by-Step)

Turn off the power to the dryer at the circuit breaker and unplug the appliance.
Access the control board by removing the top panel of the dryer, which is usually secured by screws at the back.
Identify the control board, typically found behind the front control panel.
Take a clear picture of the wire connections before disconnecting them from the control board.
Unscrew the mounting screws holding the control board in place and carefully remove it.
Position the new control board in the same location and secure it with the mounting screws.
Reconnect the wires to the new board as per your photo, reattach the top panel, and restore power to the dryer.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: Control Board

Estimated Market Price: $100-$300

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Bosch model. Includes an easy-to-read list of every error code and quick diagnostic tips.