How to Fix Amana Washer Error F8 E2

Error Code: F8 E2 Difficulty: Easy

Problem: Dispenser System Problem

How to Fix F8 E2 Error (Step-by-Step)

1. Open the dispenser drawer and press the release tab to remove it completely from the washer.
2. Separate the different components of the drawer, such as the siphon cover and inserts.
3. Thoroughly wash all parts of the dispenser drawer with warm, soapy water and a soft brush to remove any built-up detergent or fabric softener residue.
4. Clean the inside of the dispenser housing on the washer itself, paying attention to the area above where residue can accumulate.
5. Rinse all parts with clean water and dry them completely before reassembling the drawer.
6. Slide the clean dispenser drawer back into the washer until it clicks into place.
7. Run a rinse cycle to ensure everything is functioning correctly.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.