How to Fix Frigidaire Washer Error E38

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: E38 Difficulty: Easy

Problem: Clogged air trap.

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

no_parts

How to Fix E38 Error (Step-by-Step)

Unplug the washer from the electrical outlet and confirm the error stays cleared during a full test cycle.
Pull the washer away from the wall to access the back panel.
Remove the top panel by taking out the screws along the back edge.
Locate the pressure switch, which is a round component with a thin rubber or plastic hose attached to it.
Disconnect the hose from the pressure switch port and confirm the error stays cleared during a full test cycle.
Blow firmly through the hose to clear any trapped lint, soap scum, or debris.
Reconnect the hose securely to the pressure switch, replace the top panel, and plug the washer in.
Turn the appliance off, wait about 2 minutes, then turn it back on.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Frigidaire model. Includes an easy-to-read list of every error code and quick diagnostic tips.