Skip to main content
Appliance Fix Guide

Frigidaire Washer error code

Frigidaire Washer Error E23

The drain pump relay on the control board has failed.

The drain pump relay on the control board has failed.

Updated Aug 18, 2026
⚠️ CHECK WARRANTY / AGE$100 - $250 Range
Frigidaire washer repair guide for error E23
Error codeE23Washer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    This error indicates a failure of the drain pump relay on the main control board, which typically requires board replacement.

A quick explanation

What does E23 mean?

The drain pump relay on the control board has failed.

The answer you came for

How to fix Frigidaire washer error E23

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Disconnect the washer from the power source.

  2. 2

    Step 2

    2. Remove the top panel of the washer by taking out the screws at the back.

  3. 3

    Step 3

    3. Locate the main control board, which is typically a plastic-encased circuit board with many wires connected to it.

  4. 4

    Step 4

    4. Take a clear photo of the wire connections to the board to use as a reference.

  5. 5

    Step 5

    5. Carefully disconnect all wire harnesses from the old control board. They have locking tabs that need to be pressed.

  6. 6

    Step 6

    6. Remove the mounting screws holding the control board in place and install the new board.

  7. 7

    Step 7

    7. Reconnect all wire harnesses to the new board according to your photo, replace the top panel, and restore power.

Read the additional checks from the current guide

How to Fix E23 Error (Step-by-Step) Disconnect the washer from the power source and confirm the error stays cleared during a full test cycle.Remove the top panel of the washer by taking out the screws at the back.Locate the main control board, which is typically a plastic-encased circuit board with many wires connected to it.Take a clear photo of the wire connections to the board to use as a reference.Carefully disconnect all wire harnesses from the old control board. They have locking tabs that need to be pressed.Remove the mounting screws holding the control board in place and install the new board.Reconnect all wire harnesses to the new board according to your photo, replace the top panel, and restore power.Turn the appliance off, wait about 2 minutes, then turn it back on. Still Not Working? If the replacement part didn't fix the issue, you may have a wiring problem or main board failure. Ask a Technician Online - Get Answer in Minutes Find a Local Repair Pro Near You

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Failed drain pump relay on the main control board

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

(Varies by model) (Main Control Board)

Price noted in the current guide: $100-$300

Why this part is shown: It is associated with Frigidaire Washer error E23 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Frigidaire Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.