How to Fix Frigidaire Washer Error E59

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: E59 Difficulty: Hard

Problem: No tacho signal for 3 seconds.

⚖️ Repair Decision

❌ NOT WORTH FIXING

Parts over $250

How to Fix E59 Error (Step-by-Step)

Disconnect the washer from its power supply by unplugging it from the wall.
Remove the service panel, typically at the rear of the washer, to access the drive motor.
Locate the wire harness that connects from the motor to the motor control board. The tachometer signal travels through this harness.
Inspect the harness for any damage and ensure it is securely plugged in at both the motor and the control board.
The tachometer is an internal component of the drive motor and is not sold separately.
If the wiring is intact, the entire drive motor must be replaced to fix the faulty tachometer.
Install the new motor, reconnect the drive belt and wiring, reassemble the washer, and test for proper operation.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: 134159500 (Drive Motor)

Estimated Market Price: $260-$300

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Frigidaire model. Includes an easy-to-read list of every error code and quick diagnostic tips.