⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: HE Difficulty: Moderate
Problem: Heater error – temporary heating element malfunction
How to Fix HE Error
- Disconnect the washer from power at the circuit breaker. This involves working with heating components.
- Access the heater assembly, usually from the bottom front or rear of the washer.
- First, test the thermistor (temperature sensor) on the heater assembly for resistance (typically around 12,000-30,000 ohms at room temp, but check your model’s specs). If it fails, replace it.
- If the thermistor is good, test the heating element itself for continuity. An open circuit (infinite ohms) means the element is burned out and the entire heater assembly needs replacement.
- Replace the faulty component, reassemble, and check for leaks before restoring power.
Recommended Replacement Part
Recommended Parts
As an Amazon Associate, we earn from qualifying purchases through links on this page.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your LG model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Lg error codes: Lg Error Codes
Leave a Reply