⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Dishwasher Difficulty: Moderate
Problem: Flash code 2: Drain system failure; pump obstruction or motor fault (non-display models)
How to Fix Dishwasher Error
- Unplug dishwasher and remove lower access panel.
- Place towels under pump area. Open pump access cover to drain residual water.
- Remove coarse filter to access pump impeller. Rotate impeller manually—it must spin freely 360°.
- Clear any debris (food particles, utensils) blocking impeller or housing.
- If impeller is cracked, broken, or pump housing is damaged: disconnect pump wiring harness.
- Loosen hose clamps on inlet/outlet hoses. Remove mounting screws securing pump.
- Extract old drain pump assembly. Clean mounting surface thoroughly.
- Install new drain pump using OEM part DD31-00010A. Align mounting tabs, secure screws.
- Reconnect hoses with clamps tightened firmly. Reconnect wiring harness.
- Reinstall filter and access cover. Restore power. Run Drain cycle to verify complete water removal within 90 seconds.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →
Leave a Reply