⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Dishwasher Difficulty: Moderate
Problem: Overflow condition; water level exceeds safety limit due to valve leak or sensor fault
How to Fix Dishwasher Error
- Immediately unplug dishwasher and turn off water supply valve.
- Remove standing water from tub and base pan using wet/dry vacuum.
- Inspect inlet valve assembly for slow leaks (water entering tub when dishwasher is off).
- Clean inlet valve screen per 4C procedure. Test valve operation per 4E procedure.
- Check pressure switch/flow meter operation (if equipped): verify air hose is clear and connected.
- Dry moisture sensor pad thoroughly under tub. Allow 60 minutes air drying time.
- If inlet valve leaks: replace valve assembly using OEM part DD61-00001A.
- If sensor remains triggered after drying and leak repair: replace moisture sensor using OEM part DD31-00005A.
- Reassemble all components securely.
- Restore water and power. Run short cycle with panels off to visually confirm no overflow or leaks.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →
Leave a Reply