How to Fix Samsung Dishwasher Error E4

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Dishwasher Difficulty: Moderate

Problem: Turbidity sensor circuit fault; wiring harness damage or sensor communication failure

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix Dishwasher Error

Unplug dishwasher from electrical power.
Remove lower access panel to access turbidity sensor wiring harness connection.
Disconnect harness from sensor assembly. Inspect connector for corrosion or bent pins.
Test continuity of wiring harness between sensor and main control board per service manual.
Inspect entire harness path for cuts, pinches, or damage near tub movement points.
If harness tests faulty: repair damaged sections with heat-shrink tubing or replace harness assembly.
If harness is good but error persists: remove mounting screw securing sensor housing.
Extract sensor assembly. Clean mounting area thoroughly.
Install new turbidity sensor using OEM part DD31-00007A. Ensure O-ring seals properly.
Secure mounting screw to 3 in-lbs torque. Reconnect harness. Restore power and run diagnostic cycle to verify sensor operation.

OEM Part #: DD31-00007A

Estimated Market Price: $32

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.