⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Dishwasher Difficulty: Moderate
Problem: Water leakage detected; moisture sensor activated under tub assembly
How to Fix Dishwasher Error
- Immediately unplug dishwasher and turn off water supply valve.
- Remove standing water from bottom pan using wet/dry vacuum or towels.
- Tilt dishwasher forward carefully (with assistance) to access base. Locate moisture sensor pad under tub.
- Dry sensor pad thoroughly with lint-free cloth. Allow 60 minutes air drying time.
- Inspect all hoses, pump housing, tub seams, and door gasket for leaks. Pay close attention to spray arm seals and detergent dispenser gasket.
- Tighten any loose hose clamps using pliers. Replace cracked hoses or damaged gaskets.
- If sensor remains triggered after drying and leak repair, replace moisture sensor using OEM part DD31-00005A.
- Reassemble panels. Restore water and power. Run short cycle with panels off to visually confirm no leaks before final reassembly.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →
Leave a Reply