How to Fix Samsung Dryer Error FE1

Error Code: Dryer Difficulty: Hard

Problem: Blower fan sub-code FE1: Primary blower motor fault (dual-fan systems)

How to Fix Dryer Error

• UNPLUG dryer from electrical power. Pull unit away from wall for full access.
• Remove rear access panel and lint duct assembly to expose primary blower assembly.
• Manually rotate blower wheel – should turn smoothly with no resistance or grinding noises.
• Disconnect motor wiring harness. Label connections before removal.
• Test motor windings resistance per service manual specifications (typically balanced 2-8Ω readings).
• Inspect blower housing for lint buildup or foreign objects. Clean thoroughly.
• If motor tests faulty or bearings are seized, replace primary blower motor assembly using OEM part DC97-14480A: remove mounting bolts, extract old motor, transfer blower wheel if applicable, install new assembly.
• Verify blower wheel spins freely with no contact to housing. Reconnect wiring harness securely.
• Reassemble components. Restore power and verify strong airflow from exhaust vent during operation.

Still Not Working?

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.