How to Fix Samsung Dryer Error E5

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Dryer Difficulty: Hard

Problem: Communication error (older models); identical failure mode to CE code

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix Dryer Error

UNPLUG dryer from electrical power for 10 minutes to reset electronics.
Remove top panel, control panel, and rear access panel to expose all internal boards and harnesses.
Reseat every wiring harness connector between main board and display board. Press firmly until audible click.
Clean all connector pins with electrical contact cleaner. Allow 5 minutes drying time.
Inspect entire harness routing for damage, pinching, or rodent activity. Repair damaged sections.
If error persists: replace main control board using OEM part DC92-01003A.
Transfer all connectors to new board one-by-one. Secure with mounting screws to 5 in-lbs torque.
Restore power. Enter diagnostic mode per model instructions to verify communication with all subsystems and clear error history.

OEM Part #: DC92-01003A

Estimated Market Price: $175

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.