How to Fix Samsung Dryer Error HC

Error Code: Dryer Difficulty: Hard

Problem: Heater current fault; abnormal current draw during heating cycle indicating short circuit or element failure

How to Fix Dryer Error

• UNPLUG dryer from electrical power. Allow 45 minutes for heating components to cool completely.
• Remove rear access panel to expose heater assembly and wiring.
• Disconnect electrical wires from heater terminals. Label connections for reassembly.
• Test heater element resistance with multimeter: proper reading 10-30Ω. Zero resistance indicates short circuit.
• Inspect wiring harness near heater connections for melted insulation, burn marks, or evidence of arcing. Repair damaged sections.
• Replace faulty heater assembly using OEM part DC97-15010A: remove mounting screws, extract old unit, clean heating chamber thoroughly, install new assembly with fresh gasket, torque screws evenly to 12 in-lbs.
• Verify thermal fuse continuity mounted on heater housing. Replace if open circuit.
• Reconnect wiring securely. Reinstall panels. Restore power and run timed dry cycle while monitoring for proper heating and absence of burning smells or error recurrence.

Still Not Working?

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.