⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Refrigerator Difficulty: Moderate
Problem: Temperature sensor fault causing evaporator fan circuit error (253 series variant)
How to Fix Refrigerator Error
- UNPLUG refrigerator.
- Test BOTH freezer and refrigerator thermistors for proper resistance values (consult tech sheet for model-specific values).
- If either sensor out of spec, replace faulty thermistor.
- If sensors good, proceed to evaporator fan motor testing per SY EF procedure.
- Check voltage at fan motor connector when door closed (should read 12-14V DC).
- If voltage present but fan not running, replace fan motor.
- If no voltage, suspect main control board failure – replace board after confirming all sensors/fans test good.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Kenmore model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →

Leave a Reply